

Standard plaster renewal
$6,900 · 6 days of work; 28-day startup and curing care
We provide Brandon pool pump repairs, resurfacing, heater repairs, and leak detection for homes and commercial properties. Brandon's median home construction year is 1993 in the 2020–2024 Census estimates. A pool at an established home may have a newer motor, an older pump body and a finish renewed at a different time.
Detached houses make up about 54.1% of Brandon housing units, while 56.2% of occupied homes are owner occupied. We work with the homeowner or authorized property contact to understand the job and arrange access. Our aim is a clear repair plan that keeps useful equipment in service whenever that offers the better value.
We are the #1 go-to pool repair company in Brandon, Florida.
We start by checking whether a small repair will solve the problem or a full replacement is needed. Our goal is the best value for homeowners and business owners.
For a Brandon rental or shared pool, the person approving the work needs the same explanation as the person who reported it. A written scope separates a parts repair, equipment replacement and finish work, so you can compare the options without paying for an unexplained package.
Most products we install have manufacturer warranties, with coverage depending on the product and its terms.
U.S. Census ACS 2020–2024 five-year estimates. Housing data describes the community; it does not measure pool ownership, pool age or pool size.
Brandon has an estimated 48,953 housing units, including 26,489 detached homes. The median describes buildings, not the installation date of every backyard pool. Before proposing a full pump change, we look for the dates of the last motor, heater and control upgrades. A motor receipt does not establish that the pump body, valves or electrical connection were renewed. If a seller left only partial records, missing dates can stay unknown. Current equipment identification and condition can still support a sensible proposal.
The median room estimate is 5.5 per housing unit. That is a housing measure, rather than a floor-area survey or pool dimension. The useful measurements are the actual length, width and depth profile, plus any spa or shelf. For resurfacing, wall and floor area matter as well as the water footprint. We identify steps, benches and fittings in the proposed finish scope. Two pools of similar length can therefore need different quantities and preparation, even when the homes around them have similar layouts.
One Brandon quote may replace a seal or motor, while another supplies a complete pump with new connections. We explain which existing parts can stay, why replacement is proposed and whether control or electrical work is included. A higher horsepower label alone does not establish better value. The unit must work with the existing filter, heater and plumbing. When the equipment surrounding a failed part remains sound, a focused repair may be the better purchase. The written proposal should make that choice clear.
Brandon's mix of housing types makes it useful to establish whether a pool serves one home or a shared property. For an apartment or community facility, include the manager and responsible operator before selecting dates. Identify preparation, the chosen finish, fittings or markings being changed, and who handles filling and startup care. Hillsborough's commercial-pool requirements provide planning guidance for that scope. Agree on closure communication and who receives the completed-work records so the handoff supports the people operating the pool.
Shared examples from Orlando Pool Repair Pro. Photos are edited illustrations, not completed jobs in this city. Original example prices and timelines are shown.


$6,900 · 6 days of work; 28-day startup and curing care


$2,200 · 1 day


$450 · 2 hours; detection only
Choose residential or commercial services, then open the relevant guide for the work your pool needs.

We repair pool pumps, motors, seals and related parts. We check whether a focused repair can restore reliable operation before recommending a complete replacement.

We replace worn or failed pool pumps with equipment matched to the existing filter, plumbing, heater and controls. The proposal explains the complete installation and any connection changes.

We renew worn pool interiors with a clearly defined preparation and finish scope. Plaster, quartz and pebble options are considered alongside the pool’s condition and your budget.

We repair pool heaters and related components, reviewing water flow, controls and the installed equipment. We explain whether a parts repair or replacement offers better value.

We investigate unexplained pool water loss and help identify the source. Detection findings and any proposed repair are explained separately so you can understand the next step.

We repair or replace pool filters, seals and related fittings. Replacement equipment is selected to suit the circulation system and the maintenance needs of the property.

We repair commercial pool pumps and parts for shared facilities. The assessment considers the installed system and operating needs before a larger replacement is proposed.

We replace commercial pumps with equipment suited to the facility’s circulation requirements, connections and controls. We coordinate the scope and timing with the authorized manager and operator.

We resurface shared and commercial pool interiors with preparation, material selection and startup responsibilities defined in the proposal. Closure planning and applicable building or health requirements are considered for the property.

We repair commercial pool heaters and connected components. We review operating demand, flow and controls, then explain the parts needed, compatibility and expected coordination.

We investigate water loss at commercial and shared pools using the facility’s records and targeted testing. Findings help the manager compare any proposed correction and arrange the next work.

We repair and replace commercial filtration components to suit the installed circulation system. The scope considers capacity, connections, operator maintenance and relevant project requirements.
Choose residential or commercial planning prices. A written quote confirms the equipment, preparation and work included for your pool.
| Service | Typical price range |
|---|---|
| Pool Leak DetectionPublished Tampa diagnostic benchmark; complex testing and repairs are separate. | $250–$650 |
| Standard Plaster ResurfacingPublished local example for a 14 × 28-ft pool; preparation and measured interior area change the scope. | $4,500–$6,500 |
| Variable-Speed Pump ReplacementOwner-supplied residential planning range; model, connections and electrical work affect the quote. | $1,200–$4,000 |
| Minor Fitting & Skimmer Leak RepairsPublished Tampa small-repair benchmark; not a price for every pool fault. | $200–$800 |
| Service | Typical price range |
|---|---|
| Commercial Pool Pump ReplacementPlanning range for replacement equipment and its installation. Flow, motor supply, controls and site work affect the final quote. | $4,500–$15,000+ |
| Miscellaneous Commercial Service RepairsTypical range for smaller service repairs. Parts and diagnosis determine the scope; major replacements are separate. | $400–$1,500 |
| Commercial Pool ResurfacingPriced from the actual walls and floor, finish, preparation, fittings and reopening requirements. | Measured-scope quote |
Pump and service-repair ranges are planning prices supplied by Tampa Pool Repair Pro. Larger or more complex systems can cost more; resurfacing needs a measured scope.
Residential pump and commercial repair ranges were supplied by the owner on October 24, 2026. Other residential examples use the published guides below.
Share the Brandon address, pool type and requested work. For a rental, identify who can approve the proposal and arrange entry.
We compare labels with available records, keeping motor-only work separate from earlier whole-pump replacements and finish renewal.
The proposal identifies the parts kept, the parts supplied and additional work affecting the complete repair or replacement cost.
We coordinate with the approving contact. A shared facility also needs its operator involved before a work date is settled.
Repairs follow the approved plan, with water-loss diagnosis, finish work and unrelated findings clearly identified.
Keep findings, care instructions and applicable manufacturer warranty information with the property's pool records for future visits.
No. The 1993 housing median does not date your pool or equipment. A later motor or finish should be assessed on its own condition. We compare the failed part with the equipment that still works.
Yes. Include the Brandon service address, equipment details and person who can approve repairs. For shared facilities, involve the responsible operator so timing, access and startup duties are agreed.
Tell us what changed, what equipment you have and whether the pool serves a home or shared property.
Get a Quote